Products

  • Internal And External Tool Post Grinder on Lathe

    Internal And External Tool Post Grinder on Lathe

    A lathe tool post grinder is a machine tool that is used to sharpen the cutting edges of tools that are mounted in a tool post on a lathe. It can be used to grind the bevels of turning tools and to sharpen the tips of boring tools.

     

  • HSS Annular Cutter With Weldon Shank

    HSS Annular Cutter With Weldon Shank

    HSS annular cutter is perfect for cutting through tough materials.

    The cutting edge that can easily slice through metal, plastic, and other hard materials.

    The annular cutter is also very durable, making it a great choice for heavy-duty use.

  • ALIGN Taiwan AL-500P Power Feed

    ALIGN Taiwan AL-500P Power Feed

    Model:AL-500P

    R.P.M:0-160

    Max P.P.M:160

    Beval Drive Gear Rate:21.4:4.8:1

    Max Torque:780 in-lb(900Kgf/cm)

    Rated Voltage : 110V 50/60HZ

    Rated Current: 1Amp

  • ALSGS AL-510S sereis power feed

    ALSGS AL-510S sereis power feed

    AL-510S is installed on the X-AXIS ,Y-AXIS,Z-AXIS of the milling machines while AL-510SX is installed on X-AXIS,AL-510SY is installed on Y-AXIS,AL-510SZ is installed on Z-AXIS.

    Voltage – 110V by default , 220V-240V optional.

    Power Cord – US cord; UK, EU, optional. We ship the correct cord according to your ship-to-country.

    Max Torque – 650in-ib

    Weight – 7.20 KGS

  • Magnetic Core Drill Machine in 35mm 50mm or 120mm Capacity

    Magnetic Core Drill Machine in 35mm 50mm or 120mm Capacity

    The magnetic drilling machine is perfect for drilling through metal. The powerful magnets create a stronghold while the drill bit spins, making it easy to drill through even the thickest metal. The machine is easy to use and comes with a variety of drill bits to choose from. If you’re looking for an easy and efficient way to drill through metal, look no further than a magnetic drilling machine.

  • Slotting Head attachment for milling machine

    Slotting Head attachment for milling machine

    Milling machine attachment slotting head is perfect for creating slots in a variety of materials.

    With its precision construction and easy-to-use design, this slotting head is a great addition to any milling machine.

  • QKG Type High Precision Tool Vise

    QKG Type High Precision Tool Vise

    The QKG type Tool Maker Vise is a precision vise that is made of high-quality steel that has been carburized to a surface hardness of HRC58~62.

  • QGG-C type precison tool vise with groove

    QGG-C type precison tool vise with groove

    1. The Precision Vises are made of high-quality steel carburized to surface hardness: HRC58~62
    2. Parallelism 0.005mm/100mm, squareness 0.005mm
    3. Quickly to clamp and easy to operate
    4. Used for precision measurement, inspection, precision grinding, EDM, and wire-cutting machine
    5. Guarantee high accuracy in any position

  • QGG type high precision tool vise

    QGG type high precision tool vise

    1.The Precision Vises are made of high quality steelcarburized to wsurface hardness: HRC58~62
    2. Parallelism 0.005mm/100mm, squareness 0.005mm
    3. Quickly to clamp and easy to operate
    4. Used for precision measurement and inspection,precision grinding, EDM and wire-cutting machine
    5. Guarantee high accuracy in any position

  • Milling Machine Power Drawbar

    Milling Machine Power Drawbar

    Allows you to swap tools from the milling machine spindle quickly (around 3 seconds)
    For Bridgeport-type milling machine
    Easy to install. Re-use existing drawbar.
    Runs on shop air only. It requires no electricity.
    Includes pneumatic switch and air filter regular lubricator (FRL) unit.

  • Round Type Fine Pole Permanent Magnetic Chuck

    Round Type Fine Pole Permanent Magnetic Chuck

    1. Can be installed on rotary grinding machine

    2. High precision and powerful magnetic force, low residual magnetism

    3. Micropitch type suitable for smaller and thineer workpiece

    4. Fine pitch type best for larger and thicker workpiece

    5. Products can customize according to customer’s requirements

  • Fine Pole Magnetic Chuck for Surface Srinder

    Fine Pole Magnetic Chuck for Surface Srinder

    The Magnetic Chuck main uses and characteristics

    1. Fine frinding on six faces. Applies to surface grinder, EDM machine and linear cutting machine.

    2. Pole space is fine, Magnetic force is distributed uniformly. It performs well on thin and tiny workpiece machining. The working table precision doesn’t change during magnetizing or demagnetizing.

    3. The panel through special processing, with no leakage, prevents corrosion by cutting fluid, extends working life and enables to work longer time in cutting fluid.

123456 Next > >> Page 1 / 8